This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Corrupted RW data in the image with ARM4.0 tools

Note: This was originally posted on 14th October 2009 at http://forums.arm.com

I migrated from using the ARM 3.1 tools to ARM 4.0 tools. I see the data in the image which should sit in the DTCM is corrupted. The RO data is fine but I find RW data in the image is corrupted (junk). Is there any linker option which I am missing that is specific to 4.0 tools?

The intermediate file generated from the C file has the right data (so the compiler output is fine) but the image created by the linker has junk data.

Parents

Mahesh Dutta over 12 years ago

Note: This was originally posted on 15th October 2009 at http://forums.arm.com

Yes, disabling the datacompressor works fine. Thanks
Cancel
Vote up 0 Vote down

Cancel

Reply

Mahesh Dutta over 12 years ago

Note: This was originally posted on 15th October 2009 at http://forums.arm.com

Yes, disabling the datacompressor works fine. Thanks
Cancel
Vote up 0 Vote down

Cancel

Children

No data