This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

FastModels 7.1 build problems gcc 4.4 and 4.7

Note: This was originally posted on 23rd November 2012 at http://forums.arm.com

Hi,
I'm trying to build an A15 Cortex model ( FastModels/FastModelsPortfolio_7.0/examples/RTSM_VE/Build_Cortex-A15x1/RTSM_VE_Cortex-A15x1.sgproj ) on a Debian wheezy machine. I set up profiles for the gcc 4.4.7 and 4.7.1 compilers, when trying to build both result in the following errors:

Errors ( no copy pasting from FastModels it seems )

I'm wondering if anyone else ran into this or if someone knows how to fix this.

Thanks
Parents
  • Note: This was originally posted on 27th November 2012 at http://forums.arm.com


    I can't seem to expand the image enough to read the messages -- maybe it's my browser.  Maybe you could try attaching the image directly in the forum.

    But even if I could read them, you might have more luck sending the problem to ARM Support:  support-sw@arm.com.


    Sorry for that, I updated the link. I will mail them if noone here tells me it's a common fault ( caused by me ).

    Thanks
Reply
  • Note: This was originally posted on 27th November 2012 at http://forums.arm.com


    I can't seem to expand the image enough to read the messages -- maybe it's my browser.  Maybe you could try attaching the image directly in the forum.

    But even if I could read them, you might have more luck sending the problem to ARM Support:  support-sw@arm.com.


    Sorry for that, I updated the link. I will mail them if noone here tells me it's a common fault ( caused by me ).

    Thanks
Children
No data