• Locked Locked
  • Replies 7 replies
  • Subscribers 119 subscribers
  • Views 3797 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Linux applications using RVDS

Rakesh Ravi
Note: This was originally posted on 28th July 2010 at http://forums.arm.com

hi

I  cross compiled some linux code using RVDS .

i used the instructions given in the following document

Building linux Applications using RVCT 4.0 and GNU tools

i used the latest CODE sourcery tool chain for this..


The compilation went through and it created a dynamically linked excuetable which uses shared libs.

My aim is to create a static excuetable which does not depend on any shared obj .

(basically something like gcc --static ) but i am not able to find such a option with armcc.

Kindly help

Regards
Sundar
Parents
  • Note: This was originally posted on 17th August 2010 at http://forums.arm.com

    By the way, I notice that I made a mistake in an earlier post:  the GNU spelling of the option is '-static' (single '-', not '--'), so I should have said:


    Hi Scott

    Thanks, it worked for me. I was giving --static as a command line option which was the reason it was not working. When i changed it to -static as you said it worked.

    I have one last question regarding  the translate_gcc option with armcc and compiling of linux application using RVDS in general

    Does it affect the performance which RVDS promises to give over gcc ? i mean For compiling linux applications we use all gcc libraries ( code sourcery libraries, use gcc options ). The effect of this on RVDS performance over gcc.?
     

    Thanks
    Sundar
Reply
  • Note: This was originally posted on 17th August 2010 at http://forums.arm.com

    By the way, I notice that I made a mistake in an earlier post:  the GNU spelling of the option is '-static' (single '-', not '--'), so I should have said:


    Hi Scott

    Thanks, it worked for me. I was giving --static as a command line option which was the reason it was not working. When i changed it to -static as you said it worked.

    I have one last question regarding  the translate_gcc option with armcc and compiling of linux application using RVDS in general

    Does it affect the performance which RVDS promises to give over gcc ? i mean For compiling linux applications we use all gcc libraries ( code sourcery libraries, use gcc options ). The effect of this on RVDS performance over gcc.?
     

    Thanks
    Sundar
Children
No data