• Locked Locked
  • Replies 3 replies
  • Subscribers 119 subscribers
  • Views 3234 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ARM Cortex M4

Sarvesh Ranade
Note: This was originally posted on 27th May 2010 at http://forums.arm.com

Hello,
I just wanted to know if the "*.o" file generated by armcc / RVDS giving the option of processor as Cortex M3 is similar if the Cortex M4 were available. I have some code to be run and I was wondering if the Cortex M3 generated files could work with Cortex M4.
If not then in that case is ARMv7 the closest to Cortex M4 (since Cortex documents point to ARMv7 for reference) ?
In that case can I use RVDS to generate the ".o" files for ARMv7 ?
Or do I have to wait till RVDS for Cortex M4 is available ? Is there any GNU compiler which I can use ?

I am exploring the possibility re-using the existing ARM Compiler license for the Cortex M4 to which we plan to upgrade. Any advise / guidance or tips would be helpful.

Regards,
Sarvesh
Parents
  • Note: This was originally posted on 31st May 2010 at http://forums.arm.com

    Hi Sarvesh,

    Programs compiled for Cortex-M3 work directly in Cortex-M4.
    (instruction set of Cortex-M4 is a superset of the Cortex-M3).
    So you can use RVDS to compile programs for Cortex-M3, and run it on Cortex-M4.

    Keil MDK-ARM (Microcontroller Development Kit, see www.keil.com/arm/)
    already have Cortex-M4 support.  For the moment I suggest you to use Keil MDK-ARM to develop your application.

    CodeSourcery g++ also support Cortex-M4.  Please use
      -march=armv7e-m -mthumb
    and optionally (if you want to use floating point)
      -mfloat-abi=softfp -mfpu=vfpv3xd

    Hope this help.
    regards,
    Joseph


    Thanks. I will take a look and keep you posted.
Reply
  • Note: This was originally posted on 31st May 2010 at http://forums.arm.com

    Hi Sarvesh,

    Programs compiled for Cortex-M3 work directly in Cortex-M4.
    (instruction set of Cortex-M4 is a superset of the Cortex-M3).
    So you can use RVDS to compile programs for Cortex-M3, and run it on Cortex-M4.

    Keil MDK-ARM (Microcontroller Development Kit, see www.keil.com/arm/)
    already have Cortex-M4 support.  For the moment I suggest you to use Keil MDK-ARM to develop your application.

    CodeSourcery g++ also support Cortex-M4.  Please use
      -march=armv7e-m -mthumb
    and optionally (if you want to use floating point)
      -mfloat-abi=softfp -mfpu=vfpv3xd

    Hope this help.
    regards,
    Joseph


    Thanks. I will take a look and keep you posted.
Children
No data