How to debug Legacy ARM9 with RealView ICE

Hi

To install Arm Compiler 5 as a toolchain into Arm DS, please refer to
https://developer.arm.com/documentation/101469/2021-2/Installing-and-configuring-Arm-Development-Studio/Register-a-compiler-toolchain

To download/debug an executable ELF (e.g. .axf) file to your own Arm-based hardware using RealView ICE, first create a debug configuration.  Use File > New > Hardware Connection, give it a name [Next], then click "Add a new platform".  In the Debug Adapter Connection dialog, select Connection Type = DSTREAM Family, then enter the TCP/IP address of the RealView, or select the USB entry from the list.  Click Next to start the auto-detection, then follow the prompts.

In the "Edit configuration and launch" dialog, select Target Connection = DSTREAM Family, then enter the TCP/IP address of the RealView, or select the USB entry from the list.  In the Files tab, enter the .axf to download to the target.  In the Debugger tab, you can select either "Debug from entry point", or "Debug from main".

See also
https://developer.arm.com/documentation/101469/2021-2/Debugging-code/Configuring-a-connection-to-a-bare-metal-hardware-target

Hope this helps

Stephen

Hi

To install Arm Compiler 5 as a toolchain into Arm DS, please refer to
https://developer.arm.com/documentation/101469/2021-2/Installing-and-configuring-Arm-Development-Studio/Register-a-compiler-toolchain

To download/debug an executable ELF (e.g. .axf) file to your own Arm-based hardware using RealView ICE, first create a debug configuration.  Use File > New > Hardware Connection, give it a name [Next], then click "Add a new platform".  In the Debug Adapter Connection dialog, select Connection Type = DSTREAM Family, then enter the TCP/IP address of the RealView, or select the USB entry from the list.  Click Next to start the auto-detection, then follow the prompts.

In the "Edit configuration and launch" dialog, select Target Connection = DSTREAM Family, then enter the TCP/IP address of the RealView, or select the USB entry from the list.  In the Files tab, enter the .axf to download to the target.  In the Debugger tab, you can select either "Debug from entry point", or "Debug from main".

See also
https://developer.arm.com/documentation/101469/2021-2/Debugging-code/Configuring-a-connection-to-a-bare-metal-hardware-target

Hope this helps

Stephen