When I try to execute the Blinky program
On menu, select Debug -> Start/Stop Debug Session
I get a dialog box:
JLink - Cortex-M Error
No Cortex-M Device found in JTAG chain.
Please check the JTAG cable and the connected devices.
The LPC-Link2 board is connected to the LPC4330-Xplorer board correctly.
Blinky compiles with no errors.
What should I look for?
Hello Waldemir,
it seems that something went wrong during flashing of the J-LINK FW. Are you sure that you have downloaded the correct image file for the J-LINK? There is a new V2 available that works fine for me:
Do not use the first one (for older FRDM boards) and also not the V2.1. Both don't work on the K64F. Using the right one, I see the following in the OPtions for Target dialog window:
Can you try to re-flash the J-LINK FW?
Kind regards,
Christopher
Hello Christopher,
Many thanks for your help. I just downloaded the correct image and later I will test, re-flashing the J-LINK FW. I´ll let you know if ok!
Cheers,
Waldemir.
I´m still having an issue with my freescale and I´m not able to upload the code from apnt_271 sample, to continue my project.
I still cannot read the JLINK version number, from the JTAG Device Chain panel, in the Debug tab from Debug Settings.
Please, any link or direction to guide me in the re-flash process?
I already downloaded in my desktop the JLink_OpenSDA_V2_2015-04-23.bin, indicated for my Freescale FRDM-K64F.
Many thanks in advance and Congrats!!! for the great Support for the community since the beginning.
After speding some time in other aspects from my project, I´m returning to the J-LINK issue.
I´m still stuck on that. Can you help me explaining how to re-flash the J-LINK FW?
Chees,
Hello Christopher, how are you?
I´m planning to finish Project this weekend. But I´m still stuck in process, with issues trying to re-flash my card with J-LINK, as you guided.
Please, could you send me any link or whitepaper where I can find the process or topics how to re-flash?
Sorry for the many e-mails.
Waldemi.