This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Simultaneously Debugging two Cores in AMP mode

Note: This was originally posted on 9th September 2013 at http://forums.arm.com

Platform: Cortex R7 (Versatlie Express)
Debug agent: RealView ICE
IDE: DS-5

Hi,

I have a question regarding simultaneously debugging of two Cores in AMP by using RVI/DSTREAM.
Error which i am getting on connecting to target(second core) is:

Configuration already in use.

I really appreciate your suggestions.

Asif.

Parents

Martin Weidmann over 12 years ago

Note: This was originally posted on 9th September 2013 at http://forums.arm.com

I've re-created roughly what you described with the a Cortex-A15 based board I'm working with, see the attached image. Note, this attached to the two cores independently - it be a different procedure if you want a more SMP like experience.
Cancel
Vote up 0 Vote down

Cancel

Reply

Martin Weidmann over 12 years ago

Note: This was originally posted on 9th September 2013 at http://forums.arm.com

I've re-created roughly what you described with the a Cortex-A15 based board I'm working with, see the attached image. Note, this attached to the two cores independently - it be a different procedure if you want a more SMP like experience.
Cancel
Vote up 0 Vote down

Cancel

Children

No data