• State Accepted Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 9 replies
  • Answers 1 answer
  • Subscribers 120 subscribers
  • Views 7062 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Use Arm DS5 streamline performance analyzer on TX2

ShirB

Hi,

I want to profile cpu call stack analysis on my Jetson TX2

Is it possible using the DS5 streamline performance analyzer?

Is there any tutorial in order to do it?

Thanks

Parents
  • 0 Arm Employee Badge in reply to ShirB

    Instructions are the same for both - DS is just a newer version than DS-5. (7.4 vs 6.9).

    That looks like the host tool cannot connect to the device. Can you "ping" it on that IP address, and do you have any firewall software which could be stopping network traffic between the two?

Reply
  • 0 Arm Employee Badge in reply to ShirB

    Instructions are the same for both - DS is just a newer version than DS-5. (7.4 vs 6.9).

    That looks like the host tool cannot connect to the device. Can you "ping" it on that IP address, and do you have any firewall software which could be stopping network traffic between the two?

Children