• Locked Locked
  • Replies 4 replies
  • Subscribers 119 subscribers
  • Views 6040 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Starting debug server

Mark Griffiths
Note: This was originally posted on 22nd May 2013 at http://forums.arm.com

Hello,



I was using DS5 fine for connecting to my Altera board and then today it just stopped working, even the examples do not work.  So when trying to load the baremetal example, I get this error:



Starting debug server
Waiting for debug server to start accepting connections
processrunner.py:8: RuntimeWarning: Unable to determine _shell_command for underlying os: nt
  import subprocess
RDDI-DAP-DS : ERROR failed to connect to RDDI DAP target
RDDI Error Code 4107 : Connection to target failed.
RDDI DLL = rddi-dap_altera_2.dll
RDDI CFG = C:\Users\mgriffit\AppData\Local\Temp\ds5_8070900945896429705.txt
Failed to launch debug server. Command:
  /debug_server\vstrm_serverd_rddi.exe -rddi_dap_dll rddi-dap_altera_2.dll -rddi_dap_cfg \Local\Temp\ds5_8070900945896429705.txt -pollrate 200
exited with error code: 1


Any ideas  what to try?  What could have happened?
Parents
  • Note: This was originally posted on 23rd May 2013 at http://forums.arm.com

    Hello,

    I am using Windows 7 and Redhat, on both OSs it did not work.  However I randomly changed the dip switches and then it started working again.  Orginally, I had them as stated in the Altera Cyclone  manual.  Now I am not 100% sure why it works or which configuration I have :)  Any extra knowledge would be welcome.

    Thanks,
Reply
  • Note: This was originally posted on 23rd May 2013 at http://forums.arm.com

    Hello,

    I am using Windows 7 and Redhat, on both OSs it did not work.  However I randomly changed the dip switches and then it started working again.  Orginally, I had them as stated in the Altera Cyclone  manual.  Now I am not 100% sure why it works or which configuration I have :)  Any extra knowledge would be welcome.

    Thanks,
Children
No data