This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DS-5 Debugger hang issue, while debugging c/c++  application on Baremetal cortex-A8 using RTSM model?

I am using DS5 Evaluation version. I am trying to debug baremetal cortex-A8 executable.The debugger freezes when it tries to connect with Baremetal Cortex-A8 RTSM model?

How to resolve the hang issue?

Parents
  • Are you running the DS-5 Debugger (red debug icon)? It might be worth double checking your debug configuration (by right clicking in the Debug Control view and selecting "Debug Configurations") to make sure that it's referencing the right executable.

    The best thing to do might be to modify one of the example bare metal applications:

    debug-config.gif

    Hope this helps,

    Joe

Reply
  • Are you running the DS-5 Debugger (red debug icon)? It might be worth double checking your debug configuration (by right clicking in the Debug Control view and selecting "Debug Configurations") to make sure that it's referencing the right executable.

    The best thing to do might be to modify one of the example bare metal applications:

    debug-config.gif

    Hope this helps,

    Joe

Children
No data