We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello,
I am demoing ARM DS-5 Timeline view ( A subset feature of Streamline) feature set to a S/W engineers team at my customer place,
I was asked a question on how to view the events in the micro second(us) scale. As you are seeing in the
attached picture (the red round marked portion), the time scale is in seconds starting from 0s and proceeding in the scale of
10s, 20s 30s...
But, Can I see and analyze the profiling data in the order of micro seconds for example 0us, 100us, 200us? .
If so, where to do these settings?
Any hints will be much helpful.
Hi skrajago,
A couple of ways to change the zoom level is by clicking the +/- magnifying glass icons or by selecting the drop down scale as in the picture below. Current limitation is down to 1ms and thids may further be limited by the sampling rate selected during setup...
More information on using and setting up Streamline can be found on the Streamline infocenter.arm.com pages...
Let us know if that answers your question.
Thanks,Ken
Hello Ken,
Thanks for the feedback with the screenshot attached. I could figure it out that I have to check the "High Resolution Timeline" option to view the profiling report in micro second (us) even from 1 us level.
Regards,
Senthil