• Locked Locked
  • Replies 4 replies
  • Subscribers 119 subscribers
  • Views 2825 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ARM Cortex-M0 on thin board

Numaan Chaudhry
Note: This was originally posted on 23rd February 2012 at http://forums.arm.com

Hello to all

This is my first post - I'm looking forward to talking to all you guys.


I'm not too familiar with this aspects of embedded devices so this might be a basic question about the M0 - I'd like it to fit on a 3'' x 1'' board but the boards I see online - for example on here http://www.keil.com/boards/cortexm.asp - are all 3'' x 3''.

Am I missing something....?

Thanks
Parents
  • Note: This was originally posted on 24th February 2012 at http://forums.arm.com

    Thank you for the replies guys, really appreciate it :)

    I'm actually looking to connect a CMOS image sensor to it (a small one - probably about 10mm x 3mm) and then to store the capture on some flash (and transfer off via USB later).

    Perhaps taking a step back, do you think the M0 is still the best option for this?

    Many Thanks
    Regards,
Reply
  • Note: This was originally posted on 24th February 2012 at http://forums.arm.com

    Thank you for the replies guys, really appreciate it :)

    I'm actually looking to connect a CMOS image sensor to it (a small one - probably about 10mm x 3mm) and then to store the capture on some flash (and transfer off via USB later).

    Perhaps taking a step back, do you think the M0 is still the best option for this?

    Many Thanks
    Regards,
Children
No data