• State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 122 subscribers
  • Views 6045 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DS-5 CE Hello World debugging error

jhickman

I'm following the guide here (Getting started with DS-5 CE and ARMv8 Foundation Platform), on Windows 7. I've added the Linaro aarch64-elf toolchain -- there were two (I believe) symbolic link errors extracting it to Windows, but I can compile a Hello World project without issue. I've followed the instructions for configuring the debug configuration, but when I try to debug, I get this error:

The script file ( rtsm_launcher.py ) failed during execution:
Failed to launch model Foundation_Platform. Command:
  C:\Program Files\DS-5 CE v5.26.2\bin\Foundation_Platform.exe --cadi-server --print-port-number
exited with error code: -1073741819

See Target Console view for more details

I really want to target v7 Cortex A processors, so I tried again with the Linaro arm-eabi toolchain. I think it also had symbolic link errors on extraction, but also compiled Hello World without issues. Again, when trying to debug into main, I get similar errors:

The script file ( rtsm_launcher.py ) failed during execution:
Failed to launch model FVP_VE_Cortex-A9x1. Command:
  C:\Program Files\DS-5 CE v5.26.2\bin\FVP_VE_Cortex-A9x1.exe --cadi-server --print-port-number
exited with error code: -1073741819

See Target Console view for more details

What is going wrong?

Parents
  • 0
    Sometimes this error occurs because the installation is corrupted.
    You might want to try un-installing DS-5 using the below steps:

    1) Uninstall DS-5 as specified by the Release Note (readme.html)

    2) Delete all DS-5 environment variables (if any exist after the uninstall)

    3) Delete any user "Application Data" for DS-5

    4) Delete the installation folder (usually at "C:\Program Files\DS-5 v5.26.2"), if it is present

    5) Delete any DS-5 Workspaces (which are usually found under user "Documents")

    6) Re-install DS-5 v5.26.2 with Administrator permissions
Reply
  • 0
    Sometimes this error occurs because the installation is corrupted.
    You might want to try un-installing DS-5 using the below steps:

    1) Uninstall DS-5 as specified by the Release Note (readme.html)

    2) Delete all DS-5 environment variables (if any exist after the uninstall)

    3) Delete any user "Application Data" for DS-5

    4) Delete the installation folder (usually at "C:\Program Files\DS-5 v5.26.2"), if it is present

    5) Delete any DS-5 Workspaces (which are usually found under user "Documents")

    6) Re-install DS-5 v5.26.2 with Administrator permissions
Children
No data