• Locked Locked
  • Replies 3 replies
  • Subscribers 119 subscribers
  • Views 4757 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

control is not returning to assembly when tried return(0) in main of test case

Lokesh Kumar
Note: This was originally posted on 27th August 2012 at http://forums.arm.com

Hi,

Here is my code. As you can see below from C test case main has return and main was called by assembly code by using BL main.
But when I run this test control never comes back to assembly, since main is not retuning control to assembly as it should have done since BL instruction is used.

I do see that main function is getting completed as it's printing it's messages.

Do I need to do something different?
  [color=#1F497D]Assembly code is as below :-[/color]

    //ARM initialization code

//Call C main function


  BL main

     MOV r0, #0

     MOV r1, #1

     LDR r2, =0xffffffff

     LDR r10, =0xcab00010

     LDR r0, [r10]

     STR r0, [r10] ; 0's

     STR r2, [r10] ; f's

     STR r0, [r10] ; 0's

     DMB

  

  Loop 

        WFI

        B Loop

  

     B pass

  [color=#1F497D] [/color]

[color=#1F497D][/color]Main function of C code is as below :-
[color=#1F497D] [/color]int main(int argc, char *argv[]) {

     loc_puts("INFO: ARM Booted Successfully!\n"); 

    loc_puts("READ to boot space!\n");      return (0);

  }




Parents Reply Children
No data