• State Accepted Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 2 replies
  • Subscribers 122 subscribers
  • Views 6678 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RCF files

claudio06

Hi

I would like to have more insigth on rcf files: There is a bunch of parameters aka config_item.

how thery ere used? and how to get their meaning? I'm specially interested in parameters for CORESIGTH like CORESIGHT_BASE_ADDRESS_MSW

thanks

claude

Parents
  • +1

    Hi Claude,
    I assume you mean the .rcf files used by DS-5, to describe hardware targets? This page is primarily for qustions on development platforms supplied directly by ARM.

    I've moved your question to the Software Tools Community. But (if you have a support entitlement) for such a specific question, you could also consider support@arm.com

    For general information on Coresight terminology in hardware designs, you could try the white paper here: infocenter.arm.com/.../index.html which might help make sense of some of the parameters.
    HTH
    MarkN

Reply
  • +1

    Hi Claude,
    I assume you mean the .rcf files used by DS-5, to describe hardware targets? This page is primarily for qustions on development platforms supplied directly by ARM.

    I've moved your question to the Software Tools Community. But (if you have a support entitlement) for such a specific question, you could also consider support@arm.com

    For general information on Coresight terminology in hardware designs, you could try the white paper here: infocenter.arm.com/.../index.html which might help make sense of some of the parameters.
    HTH
    MarkN

Children