• Locked Locked
  • Replies 2 replies
  • Subscribers 119 subscribers
  • Views 4270 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[RVDS] Disabling strict alignment of data

Vinay Kumar
Note: This was originally posted on 23rd July 2012 at http://forums.arm.com

Hi all,


Iam using beagle board rev C3 and using RVDS compiler to compile ARM executables.

As my arm application code has some unaligned data when i try to use it, the code is getting exception.


so for this i followed one step, as i read it in arm site.

disabled strict alignment of data to detect alignment faults in data access, by using below code in application.

[font="Consolas"][size="2"]MRC p15,0,r0,c1,c0,0

AND r0,r0,#0xfffffffd

MCR p15,0,r0,c1,c0,0


but after doing this also,

iam not able to disable the strict alignment of data to detect alignment faults in data access.

Even Iam observing the same issue in ISSM simulator.

Please help me in this issue.


Thanks in advance,
Vinay.


[/size][/font]
Parents
  • Note: This was originally posted on 25th July 2012 at http://forums.arm.com


    Have you set up the MMU?

    Unaligned accesses are only allowed to address regions marked as "Normal" in the translation tables.  If you haven't set up the MMU yet, or haven't marked the regions as Normal, then unaligned accesses will always fail.



    Thanks for your suggestion.
    I have setup the MMU in hardware and ISSM, now i was able to disable strict alignment of data in the code.

    Thanks,
    Vinay.
Reply
  • Note: This was originally posted on 25th July 2012 at http://forums.arm.com


    Have you set up the MMU?

    Unaligned accesses are only allowed to address regions marked as "Normal" in the translation tables.  If you haven't set up the MMU yet, or haven't marked the regions as Normal, then unaligned accesses will always fail.



    Thanks for your suggestion.
    I have setup the MMU in hardware and ISSM, now i was able to disable strict alignment of data in the code.

    Thanks,
    Vinay.
Children
No data