• Locked Locked
  • Replies 5 replies
  • Subscribers 119 subscribers
  • Views 3641 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AXI INTERCONNECT generation

narendra kandimalla
Note: This was originally posted on 12th July 2012 at http://forums.arm.com

Hi ,

I am generating AXI Interconnect using ARM tool (adcanvas) NIC301r2p2.  I can see option to define user related signals(Read&Write).
Can any one tell what is the significance of these signals. I could not find corresponding description anywhere.

Thanks
Narendra
Parents
  • Note: This was originally posted on 17th July 2012 at http://forums.arm.com


    I mean any specific example cases where these set of signals are generally used.


    My understanding about USR signal is that unless you have to need it or just want to build your own system, you need USR signal. Otherwise, I do not recommend it.

    Just my opinion for reference.

    I think specific example depends on specific implementation. I did not use it so I do not know.
Reply
  • Note: This was originally posted on 17th July 2012 at http://forums.arm.com


    I mean any specific example cases where these set of signals are generally used.


    My understanding about USR signal is that unless you have to need it or just want to build your own system, you need USR signal. Otherwise, I do not recommend it.

    Just my opinion for reference.

    I think specific example depends on specific implementation. I did not use it so I do not know.
Children
No data