• Locked Locked
  • Replies 5 replies
  • Subscribers 119 subscribers
  • Views 3604 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AXI INTERCONNECT generation

narendra kandimalla
Note: This was originally posted on 12th July 2012 at http://forums.arm.com

Hi ,

I am generating AXI Interconnect using ARM tool (adcanvas) NIC301r2p2.  I can see option to define user related signals(Read&Write).
Can any one tell what is the significance of these signals. I could not find corresponding description anywhere.

Thanks
Narendra
Parents
  • Note: This was originally posted on 18th July 2012 at http://forums.arm.com

    Hi  Narendra,

    As others said, these USER signals are optional and are not recommended by the specification.
    Whose definitions can be set by the user, so the meaning of each bit in these signal may differ in different implementations.

    One good example of usage of these signals is PL310, cache controller from ARM. Which uses USER signals to pass some attributes.
    For more info please see the spec.

    Regards,
    Ravi
Reply
  • Note: This was originally posted on 18th July 2012 at http://forums.arm.com

    Hi  Narendra,

    As others said, these USER signals are optional and are not recommended by the specification.
    Whose definitions can be set by the user, so the meaning of each bit in these signal may differ in different implementations.

    One good example of usage of these signals is PL310, cache controller from ARM. Which uses USER signals to pass some attributes.
    For more info please see the spec.

    Regards,
    Ravi
Children
No data