• Locked Locked
  • Replies 5 replies
  • Subscribers 119 subscribers
  • Views 3641 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AXI INTERCONNECT generation

narendra kandimalla
Note: This was originally posted on 12th July 2012 at http://forums.arm.com

Hi ,

I am generating AXI Interconnect using ARM tool (adcanvas) NIC301r2p2.  I can see option to define user related signals(Read&Write).
Can any one tell what is the significance of these signals. I could not find corresponding description anywhere.

Thanks
Narendra
Parents
  • Note: This was originally posted on 12th July 2012 at http://forums.arm.com


    Hi Narendra,

    The "USER" signals supported in the NIC-301 interconnect allow you to pass "user-defined" non-AXI  information using the existing AXI channel handshake controls. So these signals don't have any defined meaning in generic documentation.

    However the specific masters and slaves would need to have a common understanding of the "significance" of the the implementations of these signals, so care must be taken when using them.

    JD



    Thanks for the reply.

    Can you please elaborate on  " non-AXI  information" ?
Reply
  • Note: This was originally posted on 12th July 2012 at http://forums.arm.com


    Hi Narendra,

    The "USER" signals supported in the NIC-301 interconnect allow you to pass "user-defined" non-AXI  information using the existing AXI channel handshake controls. So these signals don't have any defined meaning in generic documentation.

    However the specific masters and slaves would need to have a common understanding of the "significance" of the the implementations of these signals, so care must be taken when using them.

    JD



    Thanks for the reply.

    Can you please elaborate on  " non-AXI  information" ?
Children
No data