This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

NEON-How to shift the whole D or Q to left or right?

Note: This was originally posted on 12th July 2012 at http://forums.arm.com

Hello

Base on NEON instuction set, I can find the VSHL or VSHR to perform shift operation. But it is just for every element.

How can I shift the whole D or Q register to left or right?

For instance, if D = 0x0001020304050607, when it shift right 8 bit, it should become D=0x0000010203040506.

Best Regards,
Alan Chen

Parents

Peter Harris over 12 years ago

Note: This was originally posted on 16th July 2012 at http://forums.arm.com

Use the same principle as a rotate (shown in the manual), but feed in a register of zeros for one or other of the registers, depending which way you are shifting.

http://infocenter.ar...h/CIHGAEFI.html

HTH,
Iso
Cancel
Vote up 0 Vote down

Cancel

Reply

Peter Harris over 12 years ago

Note: This was originally posted on 16th July 2012 at http://forums.arm.com

Use the same principle as a rotate (shown in the manual), but feed in a register of zeros for one or other of the registers, depending which way you are shifting.

http://infocenter.ar...h/CIHGAEFI.html

HTH,
Iso
Cancel
Vote up 0 Vote down

Cancel

Children

No data