I have a TIVA launchpad TM4C123GHPM. I was able to Debug the board/code with IAR and CCS. With uVision, when i go to Debug tab, I do not see the Stellaris ICDI option from the dropdown to select the ICDI. I am using uVision 5. I do see CMSIS-DAP Debugger option but no Stellaris ICDI. Am i missing anything during the uVision installation? Please advise.
we have created an add-on installer that you can use to get back Stellaris ICDI support in MDK: http://www.keil.com/support/docs/4196.htm
IIRC, the Stellaris ICDI was just a really basic implementation - so the effort may be better spent in using a better debug probe ... ?
Thank you Christopher. That was helpful. Pretty much what i thought i would need. Thanks again.
Thank you Christopher. The best one
I have downloaded and run the exe file linked in the support docs 4196.htm. However I cannot see the Stellaris ICDI under the debug TAb in the options for Target 1 dialog.
Are there additional steps required after running the exe file?
there are no additional steps necessary. Just run this installer which is attached to our knowledgebase article www.keil.com/support/docs/4196.htm and specify the correct MDK installation path.
This installer copies the uVision driver (lmidk-agdi.dll) for this debug interface into the BIN folder and also adds it to the Tools.ini file. I tested it with a genuine MDK 5.29 installation and after that I was able to select the 'Stellaris ICDI' debugger in the 'Options for Target - Debug' dialog.
View all questions in Keil forum