I am new to ARM and I am trying to produce 1 second delay using timer 0 in LPC2148. But in debug session in Keil, it is giving delay of 4 seconds with 15MHz and 5 seconds with 12 MHz. What is the issue ?
Here is my code.
#include <lpc214x.h> int main() { IODIR0 = 1; // P0.0 is output pin IOSET0 = 1; // P0.0 is high T0PR = 15000000 - 1; T0TC = T0PC = 0; T0TCR = 1; // start do { while(T0TC == 0); T0TC = 0; IOCLR0 = 1; // P0.0 is low while(T0TC == 0); T0TC = 0; IOSET0 = 1; // P0.0 is high } while(1); }
Real hardware or simulator?
Toggling pin halves frequency observed at GPIO.
Not sure of merit of setting counter to zero when already supposedly zero.
Find other examples. Check internal clock, perhaps there is a means to export to a pin?
In simulation. In keil as well as proteus, both are giving 4/5 seconds of delay. What I am thinking is I have configured frequency to 12MHz and Vpbdiv by default is 0. So it may be diving the frequency by 4. Is it possible ? but PLL configurations are default.(Set by startup code).
kamalpancholi said:it may be diving the frequency by 4. Is it possible ?
What does the chip documentation tell you?
View all questions in Keil forum