EasyWEB work fine on MCB2300 when I press reset button. After disconnect and next connect power supply web page does not show. I must press reset button always after connect power supply and then works OK.
Do you have similar symptom?
But it does contain AXF
This zip file don't contain hex or bin file.
You can download an executeable RL-ARM HTTP Demo example from: http://www.keil.com/download/docs/328.asp
Unfortunately I don't have RL-ARM license and I can't run TCPnet example. Can someone tell me that have this same problem like me with this EaseWeb example? Becouse I don't know is it trouble with hardware or software.
Keep in mind: the EasyWEB example is a free example that shows you just some basics (such as the interface to the Ethernet controller). You will find several shortcomings with this product when you look deeper.
A commercial product is the TCPnet suite in RL-ARM. An example is provided under: http://www.keil.com/download/docs/328.asp
Does this example show also the RESET problem that you are describing?