Hello, I have a problem concerning the Keil MCBXC167-Board and the Easyweb-Application (Demo on the CDROM): Connection via PING or HTTP is not possible (timeout). IP and subnet mask are set correctly, there is also an ethernet link (LEDs LINK and SPEED are both on). - LED at P2.15 is continuosly on - Clock is 16 MHz (measured with oscilloscope via pin P3.15 with CLKOUT enabled) - DIP switches are default - LED ACT blinks sometimes if trying a PING from PC - Target in Keil is "On-Chip Flash" Any idea? Regards, Roland