fopen write error sdmmc

I am driving a 32 GB SD card with Keil MDK5 Flash File System v6.14.1 with core LFN debug mode.
Init, Mounting, and also read operations from SD card works properly. But creating or deleting a file and then open it in write mode doesn't work at all.

device: stm32H750vbt6 with ARM CORTEX-M7

core clock (frequency): 480e6

SDMMC1 configured clock (frequency): 100e6

RTOS type is  CMSIS-RTOS2 Keil RTX version 5 (RTX5)

Number of open files that configured in FS_Config.c file: 5 

Heap Size = 0x2000 > 5 * (608) 

Stack Size: 0x400

Card Detect Input pin and Write Protect Input pin: not available

initialization code:

//file fsys_init.c
#include "fsys_init.h"

SD_HandleTypeDef hsd1;

//fsys_init called in app_main thraed
void fsys_init(void){
	
	static volatile fsStatus  error_tp;
	error_tp = finit ("M:");
	if (error_tp != fsOK) 
    fsys_error_handler(fsys_finit_error, error_tp);
  osDelay(10);
  // Mount the M: drive.
	error_tp = fsOK + 1;
	while(error_tp != fsOK ){
		error_tp = fmount ("M:");
	}
	//HAL_SD_MspInit(&hsd1);
	
	
}
/**
* @brief SD MSP Initialization
* This function configures the hardware resources used in this example
* @param hsd: SD handle pointer
* @retval None
*/
void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
{
  GPIO_InitTypeDef GPIO_InitStruct = {0};
  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
  if(hsd->Instance==SDMMC1)
  {
  /* USER CODE BEGIN SDMMC1_MspInit 0 */

  /* USER CODE END SDMMC1_MspInit 0 */
  /** Initializes the peripherals clock
  */
    PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SDMMC;
    PeriphClkInitStruct.PLL2.PLL2M = 1;
    PeriphClkInitStruct.PLL2.PLL2N = 25;
    PeriphClkInitStruct.PLL2.PLL2P = 2;
    PeriphClkInitStruct.PLL2.PLL2Q = 2;
    PeriphClkInitStruct.PLL2.PLL2R = 2;
    PeriphClkInitStruct.PLL2.PLL2RGE = RCC_PLL2VCIRANGE_3;
    PeriphClkInitStruct.PLL2.PLL2VCOSEL = RCC_PLL2VCOWIDE;
    PeriphClkInitStruct.PLL2.PLL2FRACN = 0.0;
    PeriphClkInitStruct.SdmmcClockSelection = RCC_SDMMCCLKSOURCE_PLL2;
    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
    {
      fsys_error_handler(0, 0);
    }

    /* Peripheral clock enable */
    __HAL_RCC_SDMMC1_CLK_ENABLE();

    __HAL_RCC_GPIOC_CLK_ENABLE();
    __HAL_RCC_GPIOD_CLK_ENABLE();
    /**SDMMC1 GPIO Configuration
    PC8     ------> SDMMC1_D0
    PC9     ------> SDMMC1_D1
    PC10     ------> SDMMC1_D2
    PC11     ------> SDMMC1_D3
    PC12     ------> SDMMC1_CK
    PD2     ------> SDMMC1_CMD
    */
    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                          |GPIO_PIN_12;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
    GPIO_InitStruct.Alternate = GPIO_AF12_SDIO1;
    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);

    GPIO_InitStruct.Pin = GPIO_PIN_2;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
    GPIO_InitStruct.Alternate = GPIO_AF12_SDIO1;
    HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);

    /* SDMMC1 interrupt Init */
    HAL_NVIC_SetPriority(SDMMC1_IRQn, 0, 0);
    HAL_NVIC_EnableIRQ(SDMMC1_IRQn);
  /* USER CODE BEGIN SDMMC1_MspInit 1 */

  /* USER CODE END SDMMC1_MspInit 1 */
  }

}

void fsys_error_handler(fsys_error id, fsStatus  error_tp){
	
	__asm("BKPT #0");
	
}

After debugging the following events occurred when I tried to open and create "M:\filesys\Dump_file.logo" in write mode:

Event, Time (sec), Component, Event Property, Value
0, 0.00039830, EvCtrl, EventRecorderInitialize, Restart Count = 1
1, 0.00040655, EvCtrl, EventRecorderStart, 
2, 0.00236864, EvCtrl, EventRecorderInitialize, Restart Count = 2
3, 0.00237939, EvCtrl, EventRecorderStart, 

4, 0.00262214, FsCore, finit, drive=0x0800AFBC
5, 0.23689052, FsCore, fmount, drive=0x0800AFBC
6, 6.21071641, FsCore, sys_open, name=0x080048C8  openmode=0x00000004

7, 6.34828006, FsFAT, FileIsNonExistent, drive=M0
8, 6.47961456, FsMcMCI, TransferError, instance=0  events=0x00000084
9, 6.52405997, FsMcMCI, TransferError, instance=0  events=0x00000084
10, 6.56378528, FsMcMCI, TransferError, instance=0  events=0x00000084
11, 6.60354884, FsMcMCI, TransferError, instance=0  events=0x00000084
12, 6.64327516, FsMcMCI, TransferError, instance=0  events=0x00000084
13, 6.68302375, FsMcMCI, TransferError, instance=0  events=0x00000084
14, 6.72276447, FsMcMCI, TransferError, instance=0  events=0x00000084
15, 6.76250128, FsMcMCI, TransferError, instance=0  events=0x00000084
16, 6.80345253, FsFAT, SectorWriteFailed, drive=M0  sector=32640  count=1

The event TransferError is generated when data transfer is active and data block CRC check fails or Memory Card Control Layer does not receive ARM_MCI_EVENT_TRANSFER_COMPLETE event from the MCI driver.

Clever engineers, please help me to solve these bad events!!