This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

MIMXRT685 (Cortex M33) DS5 and ARM Development Studio with DSTREAM ST/PT Debugger

Hi, i want to connect the MIMXRT685 (Cortex M33) either in DS5 (v5.29.3) or in ARM Development Studio 2021, but unsuccessful. I used as Debugger:

DSTREAM ST/PT Firmware 7.4..0-3i in ARM Dev. Studio and

DSTREAM ST/PT Firmware ARM_RVI_4.34.0-132.

I get these errors:

In ARM Development Studio 2021 :"Scanchain detection failure: Detected number of devices = 136, maximum allowed = 128. This problem is usually a result of the scanchain not acting correctly when using JTAG scans to count the number of devices"

In DS5: "Scanchain detection failure: Detected number of devices = 1.024, maximum allowed = 1.023. This problem is usually a result of the scanchain not acting correctly when using JTAG scans to count the number of devices"

Can you help me to reslove this problem.

Thanks in advance

Parents Reply Children
No data