• ARM99260 boot from NOR flash....
    We have checked in the user manual but we are not sure that it will work because they have mentioned to connect Serial data flash with CS0 and after that use NAND flash with NCS3. We would like to...
  • Booting AT91SAM9263 from NOR flash
    Hi, Maybe, I've the same problems described in this thread http://www.keil.com/forum/docs/thread13351.asp. It would be perfect if you could give me some hints and your modifications in the startup...
  • AT91ARM9260 boot from NOR flash
    Hi, We would like to use NOR flash connect to the NCS0 of processor. So anyone had tried. Is ARM9260 processor can boot from NOR flash. Please let us know comments if any one have. Best regards...
  • ARM9 Boot- Booting AT91SAM9263 from NOR-Flash
    Hi, i use a AT91SAM9263 and i will boot it from nor-flash. At boot time i must switch the master clock at a higher frequency. This switch can’t be performed from NOR flash, as the access timings to...
  • how to boot at startup
    Good afternoon, We have got the following problem. We have the keil monitor mon51 at 0000h. We have a C program at 8100h. We are able to start our program (after beeing loaded ) thanks to dscope...