• Port pins too slow
    Hi.. I have a problem with the xc167ci. Its I/O-Pins toggle too slowly. If I have e.g. pin 4^0 toggeling, it only works with 2,85 MHz instead of 40 MHz (system clock). I use the following sourcecode...
  • SPI communication is too slow.
    Hi, I have written code for communication between C8051F120 and C8051F350 using SPI. C8051F120 is running at 100 MHz and C8051F350 running at 50 MHz - which is maximum possible for both. SPI clock...
  • tcp connection slow over gprs
    Hello, we are sending data using method www.keil.com/.../rlarm_tn_using_tcpsoc_example.htm however, the ping delay between the server and client is more than 1500ms (VPN over slow GPRS) ...
  • CLOCK TOO SLOW AND MUST BE FASTER
    I NEED THE PORCESSOR TO RUN AT 82MHZ BUT THE XTAL IS 13>7242MHZ HOW DO I PROGRAM C TO GET THE CODE FASTER? I LOOK IN UVISION AND CHANGE THE FREQ BUT IT DOESNT MAKE CHANGE IN CODE! HAVE I GOT...
  • External Flash (via FSMC) too slow
    Hello, I'm working with an STM32 (specifically the STM32F103ZE) with an external NAND Flash memory connected to it. I'm using the memory chip and schematic described in ST's application note AN2784...