• Help me!A truoble of UDP
    Hi all: I use PPP dial through GPRS modem,and communication with the server used UDP. Some times,one packet of modem gived to cpu lost some bytes.if the server hold on send udp data,the cpu can not receive...
  • at91sam9263 keil debug problem
    at91sam9263 keil debug problem when i created a project for at91sam9263 for simple addition and subtraction program I am unable to simulate it is strucking up at 000h location only so plz help me...
  • at91sam9263 debug problem
    Hello, I have problem with debugging at91sam9263... When start debugger i cannt see peripherial registers- there is only "Reset" position. What is wrong?
  • Booting AT91SAM9263 from NOR flash
    Hi, Maybe, I've the same problems described in this thread http://www.keil.com/forum/docs/thread13351.asp. It would be perfect if you could give me some hints and your modifications in the startup...
  • ARM9 Boot- Booting AT91SAM9263 from NOR-Flash
    Hi, i use a AT91SAM9263 and i will boot it from nor-flash. At boot time i must switch the master clock at a higher frequency. This switch can’t be performed from NOR flash, as the access timings to...