• Programming AT89S52 using FLIP
    Dear friends, I am planning to develop my own AT89S52 development board having ISP facility using FLIP software. While going through the documentation of Flip available on ATMEL's site, I could...
  • Atmel FLIP for 89c51ED2
    I tried using Atmel FLIP to program a fresh 89c51ED2. I have MAX232 and FLIP communicates and establishes the connection with the uC (as it shows all the parameters, bootloader version etc and all the...
  • bootloader for at89c51rd2 and FLIP
    Hello all, I'm a newbie to 8051 programming. I want to use Atmel's FLIP to program an at89c51rd2 chip using the COM port. According to the FLIP instructions, there needs to be a bootloader on...
  • JK Flip Flop
    What would be the output of a 74LS112 JK Flip-Flop at the end if J=0 and K=1 for one clock pulse then J=1 and K=1 for the next 3 clock pulses? PS is 1 CLR is 1
  • FLIP Issue - AT89C51CC03 - Vector Hardware
    We are having an issue with FLIP 3.2.0 which also exists on previous versions (ex. 2.4.0) Here is the problem: - Using an AT89C51CC03 and batchisp.exe with Vector Hardware (CANCASE XL) - First...