• problem in pll settings
    hello I am currently working on a project which has 20 Mhz osc. I am using LPC2368 I want CCLK should me 48Mhz Can anybody please explain me configuration required for pll registers. I have gone...
  • MCB2300 pll settings?
    Looking at lpc2300.s from the RTX_blinky for example, it looks like cclk would end up running at 24mhz. Am I interpreting this correctly, and if so, why is it set so slow? Dave
  • pll and clock setup issue on mcbstm32c
    hey,, >>i want to use usart-2 peripheral on MCBSTM32C and i realised the baud rate set was incorrect, (inspite of right calculations) which was because of the incorrect plck-1 (=112.5Mhz, which should...
  • STM32F103 PLL Ready Flag Never Set
    I am trying to set PLL as my system clock source upon startup of my microcontroller, STM32f103( www.kynix.com/.../STM32F103C4T6A.pdf ) I have commented all the defines in my system_stm32f10x.c ...
  • URGENT:LPC2378 USB not Recognized,PLL setting
    Hi Friends, I am using LPC2378 processor with 16 MHz crystal oscillator.I am trying to connect the USB CDC but the USB device not recognized by PC. The same code using the 12 MHz oscillator is...