• ARM99260 boot from NOR flash....
    We have checked in the user manual but we are not sure that it will work because they have mentioned to connect Serial data flash with CS0 and after that use NAND flash with NCS3. We would like to...
  • Booting AT91SAM9263 from NOR flash
    Hi, Maybe, I've the same problems described in this thread http://www.keil.com/forum/docs/thread13351.asp. It would be perfect if you could give me some hints and your modifications in the startup...
  • ARM9 Boot- Booting AT91SAM9263 from NOR-Flash
    Hi, i use a AT91SAM9263 and i will boot it from nor-flash. At boot time i must switch the master clock at a higher frequency. This switch can’t be performed from NOR flash, as the access timings to...
  • nor flash device - boot at startup
    Hi, I want to use a nor flash device to boot at startup (using the controller AT91SAM9260). But there are different kinds of flash devices and I'm not sure if it's possible to do that. I tested...
  • MCBSTM32F200 flash external NOR
    Hi I have the evaluation board MCBSTM32F200 and I would know how to flash the Blinky's project into the external Flash NOR and run from this. As I know, in Options Target of uVision IDE you can...