• LPC2136 UART0 interrupt not working
    Hi all, Im using LPC2136 and i want to use the UART0 serial port interrupt to receive data but it does not work. configure all the registers and I do not see any jump towards the interruption when...
  • UART0 setup
    Hello guys; I have been working on UART0 setup of LPC2132 for a long time. I have achieved anything yet.Once I loaded a wrong pll setting and put the uc to death.I couldn't reload the correct settings...
  • UART0 and LPC2148
    Hello! I'm quite new at LPC21XX world and in the beginning I stumble at UART0 problem. I can get it right. I copied example program from Phillips site, try to correct it and no luck. When ever I try...
  • uart0 interrupt
    dear all i have written the foll. code for uart0 interrupt in lpc2148. i have baudrate=9609 transmission of first letter 'D' is done but my interrupt is not generated and due to this second letter ...
  • UART0 of LPC2148
    Hello I'm using ARM LPC2148. I want to use UART0 of ARM controller. Our 8051 provides UART with 4 modes viz Mode0,Mode1,Mode2 & Mode3. Preferably we use Mode1 for Serial transmission. We use Mode0...