• MCB2300 3.3 and 5 volts on board
    Dear All, I see in bottom to the MCB2300 (LPCR2378) and between INT0 button and buzzer the exits for 3.3V, 5V and GND. I have measured these exits (3.3 + GND and 5 + GND) with test multimeter but...
  • Running *.bat before debug start
    Hi, How can I run a batch file to completion just before loading the program for debug? The batch file flashes 'settings.hex' file to a predefined location in memory where the app should access...
  • ADC conversion to volt in MSC1210
    Hi, I am using Texas instrument MSC1210 microcontroller (with a clock frequency of 3.6864MHz). This controller has a 24 bit sigma delta ADC unit. I am trying to convert the raw ADC values from it...
  • LPC 2129 3.3 Vdda not connected
    I have designed a pcb to run the LPC 2129 in the LQFP64(64 pin) package. As the system was too congested i decided to skip the 3.3 Vdda connection believing it to be required only for the ADC as a reference...
  • power apply module
    i wanna write some code for a usb module to take a 5v 1a input on the mini input and output 51a on a micro output. you know like the modules you get on ebay. but i wanna do it with the connectors...