• mcbstm32c ethernet connection problem
    hi we are using mcbstm32c board. we used and tried every examples (we downloaded examples from keil ) on this board with keil . all examples worked succesfully except network examples . we could not...
  • help about mcbstm32c ethernet usage
    hi there, im new on this board. i found an example http_demo that can be used for accessin the mcbstm32c board from the pc via ethernet. the example is precompiled, i dont need to compile it to load...
  • pll and clock setup issue on mcbstm32c
    hey,, >>i want to use usart-2 peripheral on MCBSTM32C and i realised the baud rate set was incorrect, (inspite of right calculations) which was because of the incorrect plck-1 (=112.5Mhz, which should...
  • DFU on MCBSTM32C
    Is it possible to do DFU programming on the MCBSTM32C through the USB? I've downloaded the DfuSe software from STMicroelectronics and converted a working version of blinky.hex to blinky.dfu, but how...
  • Problems with MCBSTM32C CAN Ports
    Hi there, I have problems setting up the two CAN ports on the MCBSTM32C demo board. I got them to work in loopback mode but in normal mode the INAK bit doesn't set itself to 0. In the manual it...