• RTX Nuvoton setup
    Hi, im trying to port RTX kernel on Nuvoton NUC140 board. i am facing problem wrt the setup required for RTX kernel on Nuvoton board. i have added all the required setup files for NUC140 and for RTX...
  • Problem with setup in logic analyzer
    I use STM32f103RCT6 to blinking led in pin A8 with 1 second delay, and i try to use logic analyzer to see whether it's right. However, when i setup in "Current Logic Analyzer Signal", i write PA.8 in...
  • vpbdiv setup
    The example's startup file in The Insider Guide from Hitek has the option to set XCLKDIV:XCLK Pin which changes bit# 2-3 of VPBDIV register. LPC2131-UM pg.50 indicates that bit# 2-7 are reserved. Is...
  • ADC Setup
    Hi, I have a problem with ADC initialization. The following part is draft needs to be filled with correct information Step by step according to the user manual. But I am not sure where I made mistake...
  • PPP setup
    I'm attempting to get PPP working. I have a socketmodem connected to an LPC2468 on uart 1. have the serial driver working. Do I need to include Std_Modem.c in my project? Where do I make changes...