• Again usb fails to enumerate
    hai, Earlier I had problems with FX2 enumeration. But when I changed the port it was working well. I have developed the firmware for one board with FX2. Now I want to use the same firmware for another...
  • Usb failed packets
    Hello, What could be causing failed packets Connection Status Device connected Current Configuration 1 Speed Full Device Address 1 Number Of Open Pipes 0 Device Descriptor NXP LPC17xx Speaker...
  • USB driver update failed
    HI, Now with CMSIS FreeRTOS I could get software enumerating USB Serial Device (COM Portx) in Device manager. I verified the Vendor ID and Product ID which matches with Hardware IDs in driver properties...
  • usb communication fail
    hello! when i debugger LPC2368 with Jtag RDI ,communicating with PC through USB, there is always one error: pc of target system has unexpected value of 0xfffff0 after execution in arm. why? how to...
  • Running an lpc1768 as a USB device fails
    This question is a follow up to this one: https://community.arm.com/developer/tools-software/tools/f/keil-forum/47193/implementing-a-non-hanging-usb-listener/166340#166340 trying to narrow down the...