• External memory
    hello, i've declared an external memory mapped at address 8000H, and load data into it : unsigned char xdata xdisp[15][24] _at_ 0x8000; unsigned char i; for (i = 0; i < 16; i++) { xdisp[i][0] ...
  • external memory
    Hi, I work on ST10F168 and i use external ram by EBC in 16 bits demux mode with keil V2.38 There are 4 Chip Select available for ram : CS1,CS2,CS3,CS4 and 23 adress bits : A1->A23 So, there are (2...
  • external memory
    Hi, I work on ST10F168 and i want to control by EBC 2 SRam chip 1M*8bits like 1 chip 1M*16bits. But how to declare in keil that external memory is 16bits data. I declare it in start166.A66 (_BTYP1 EQU...
  • External memory
    hi Guys. I have simple starting board for C167CS-LM with AM29F400BB flash. i use the Flashit 9 software for loading code in flash.this software use bootstrap loader method. Can read data of flash...
  • External memory
    Hi everyone. I need your help to solve this issue. I am using a XC164CS microcontroller to run an aplication. The next aplication code toggles a P9.0 pin every 8 seconds. #include <XC164.h> #define...