• ARM MCB2300 Problem
    He at All I have a big problem on board MCB2300 with LPC2368 When open the enviroment uVision and chk the ulink2 setting any time not show the "Jtag device chain" any time press more time the reset...
  • MCB2300 CAN interface problem
    I'm using the MCB2300 board with uVisin3 and ULINK2. When I load the CAN example from the NXP site (LPC23xx_24xxSampleSoftware.r5) the download goes without any truble. But when i try to download the...
  • MCB2300 ETM problem
    Dear all, I uses MCB2300 ver3(LPC2360 on it). JTAG connection has no problem. I bought JTAGJet-Trace256K(signum), and a tyco-amp connector for ETM coneection whose pattern is printed on MCB2300...
  • Ethernet problem on MCB2300 LPC2387
    All: I have the HTTP_demo working perfectly on the MCB2300. I have designed my own board so that its Ethernet is hooked up exactly the same as the MCB, same PHY, same connector, same everything. The...
  • ULINK2 and MCB2300 problems
    I've just got MCB2300 with LPC2378 on it and ULINK2 adapter. When I try to connect to the board, there's a messsage "JTAG communication failure" in the Target Driver Setup window. Also, serial no., ULINK...