• LPC1788 + FreeRtos or RTX + bootlader + Ethernet
    Hi all, I have try to develop an ethernet bootloader via tftp. First program (bootloader is placed in 0x0000-0xFFFF adress area) gets bin file from tftp-server and flashes it to from 0x10000 to the...
  • RS232 Flash Magic Download
    I have version 3.0 and 3.1 of the MCB2300 evaluation board. With version 3.0 I am able to download a hex file using the Flashmagic executable via the RS232 port COM0. When I try to down load to the version...
  • Flash magic on MCB2300
    Flash Magic version is 4.11. Jumpers J10: ON Jumpers J13: OFF Jumpers J4: OFF any a operation of the follows gets the same error of "operation failed. failed to autobaud-step1" click "ISP...
  • bootloader flash magic
    I using flash magic to load the hex file format program to the board lpc1769.when I load programs in lpc17xx.cmsis.driver.library exsamples UART-interupt to the board is not problems ,but then when I...
  • USB - FLASH MAGIC Firmware
    Hi, I am using LPC2148 based ARM7 processor (MCB2140 Board) for my development. I used Flash magic tool to download the firmware through Serial Port (COM0 RS232 ). Instead of using RS232...