Hello,
I have a custom ARM Cortex-A9 board. My aim is to load the kernel image onto the target via ARM DSTREAM. I have u-boot loaded into SNOR memory. The u-boot is running fine. After I get the u-boot prompt…
Hello,
I have a custom ARM Cortex-A9 board. My aim is to load the kernel image onto the target via ARM DSTREAM. I have u-boot loaded into SNOR memory. The u-boot is running fine. After I get the u-boot prompt…
IDE: ARM DS-5 (v5.17.0)
Platform: Cortex-A8 (BeagleBoard…
I am working on PB1176JZF-S board. I am usins DS-5 editor and Dstream. I am able to write the program and bebug it. But i want to download my code into NOR or some static memory on the board. Please kindly tell me the procedure. I wrote a program to blink…
hello all
when i use DS-5 tool coupled to a Dstream to debug IMX6Q bare-metal, I get errors when I try to connect to te target: "Unable to connect to usb, Unable to connect to device CSMEMAP"or "Unable to connect…
I add about 1000 elf image files to the streamline session capture, and it hints "Java heap space" on error window. I have tried to add the -Xms1024m -Xmx1124m to the eclipse.ini, but failed too.
How can I increase the heap space for the streamline…
1
I have discovered that running my board support code using the DS-5 and DSTREAM causes different behavior than executing without debug support. For example, in the case of Ethernet, the MAC transmit will not occur unless there is a 1 second delay inserted…
To Anyone out there,
I was wondering if someone could help me to connect a DSTREAM to a BCM Advanced Research Board (Freescale i.MX6 ARM Motherboard, Cortex A9 Solo Core, HDMI, LVDS, RISC-based, MIPI-CSI Camera Interface, low power ARM M…) running…
My client has provided a DSTREAM and professional edition of DS5. I am new to DSTREAM. We are working on freescale vybrid. When I tried to debug my application in DS-5 using vybrid tower and DSTREAM it is able to debug. But when I tried on our custom…
I am just getting started on a new project. I need to be able to connect my DSTREAM via ethernet but I am offsite with no static IP.
Is it possible to configure the DSTREAM via url (dynamic DNS) instead of IP address? If it cannot resolve domain…
I want to use the DS-5 and DStream to debug the u-boot, so I write a memory initialization sequence into file cmimx6q.ds, which is a list of commands like:
mem set 0x020e05a8 32 0x00000028
and I specify this file as the input of Run target…
Efficiency is at the heart of the ARM® architecture. ARM cores are commonly used in products where power consumption and battery life are critical considerations, but this can pose additional challenges for a debugger. For DS-5 v5.21, DSTREAM support…
A couple of months ago I posted this blog discussing how to get started with the Fixed Virtual Platform supplied with DS-5 Ultimate Edition. I'm writing this blog as a follow up, as ARM has just released their first ARMv8 Development Platform, J…
In this article I will explain how ARM® uses FPGA boards during the development of new cores to validate the design and how this technique is particularly useful to reduce project time and costs, giving an effective competitive advantage in the market…