• How can I R/W general registers via CSAT tool?

    Emmy0
    Emmy0

    Hi experts,

         I want to read/write Cortex-A53 core0 general registers (such as x0, x1, ...) via CSAT tool of DS5.

         I use the following command lines via csat tool, but I don't know what's the command line can read/write general registers.

         

    …
    • over 3 years ago
    • Software Tools
    • Arm Development Studio forum
  • DS-5 and raspberry pi 2

    John
    John

    Hi there,

    I'm trying to use the raspberry pi 2 with ARM DS-5. The first step is to add the raspberry pi into dev. boards in debug configurations options. How can I do this?

    Thanks!

    • over 5 years ago
    • Software Tools
    • Arm Development Studio forum
  • DS-5下ARM Compiler6创建HelloWorld工程并Debug?

    caotianxiang
    caotianxiang

    请问DS-5下如何创建一个简单的HelloWorld工程,并进行Debug?   工程中需要添加哪些文件,Debug Configuration中需要设置哪些东西?

    • Answered
    • over 5 years ago
    • 中文社区
    • 中文社区论区
  • How to create configdb entry for debug to conect to coresight using D-STREAM. I put ARMCS-DP in scan chain and try to configure.

    Shaibal Dutta
    Shaibal Dutta

    Hi,

    I am trying to  create configdb entry for debug to conect to coresight using D-STREAM. I put ARMCS-DP in scan chain and try to configure .

    Debug hardware config tool complains Coresight ROM table has failed - failed to read confi item DAP_CONFIG_INFO…

    • over 6 years ago
    • Software Tools
    • Arm Development Studio forum
  • I use J-Link GDB session to debug assembly code for LPC2148 device. I set a hwbreak at some address in flash. I receive 'SIGTRAP, Trace/breakpoint trap. PC in ?? ()'

    Jo Van Montfort
    Jo Van Montfort

    I use SEGGER J-Link GDB session to debug assembly code for NXP LPC2148 device. I set a hwbreak at some address in flash. I receive 'SIGTRAP, Trace/breakpoint trap. PC in ?? ()' If I want to step through the code I get 'Cannot find bounds of current function…

    • Answered
    • over 6 years ago
    • Software Tools
    • Arm Development Studio forum
  • Whether ARM DS-5 have Inforce6540 (Snapdragon 805, Cortex-A15) bare-metal support?

    Sreenath P V
    Sreenath P V

    Hi ,

    I have purchased  Inforce6540 (Inforce6540). I want to do bare-metal debug with ARM DS-5. Is any one knows, Whether ARM DS-5 have Inforce6540 (Snapdragon 805, Cortex-A15) bare-metal support?

    Best Regards

    Sreenath P V

    • over 6 years ago
    • Software Tools
    • Arm Development Studio forum
  • Question regarding "Debugging on Baremetal configuration startup cortex A-150"- I encounter the below mentioned error

    Ishan
    Ishan

    ERROR(COR118-TAD11-NAL20):

    ! Unable to determine if SVC was a semihosting call

    ! Failed to write 18 bytes to address S:0x80070018

    ! Verify error on memory operation.


    I started debugging from entry point and i see the following situation:-

    LDR PC, Reset_A…

    • over 6 years ago
    • Software Tools
    • Arm Development Studio forum
  • How to configure DSTREAM to debug linux application?

    ds-5
    ds-5

    Run->Debug Configurations->Linux Application Debug->Connect to already running gdbserver

    (1) how to run gdbserver in this case

         I use a separate USB to connect to phone usb port, together with a JTAG connection to DSTREAM box…

    • Answered
    • over 6 years ago
    • Software Tools
    • Arm Development Studio forum
  • Andriod NDK support for ARM assembly.

    Madhu
    Madhu

    Hello everyone... I am trying to build,debug, & run C, Assembly code in android NDK. I have Succeed in C. But when i am working with Assembly am getting an error: "too many memory references for 'add' ".

    Andriod.mk file is:

    LOCAL_PATH…

    • over 6 years ago
    • Software Tools
    • Arm Development Studio forum
  • Moving build output directory 'Debug' to another location in the project folder under DS-5 Eclipse environment?

    Pradeep Arora
    Pradeep Arora

    How do I move build output directory 'Debug' to another location in the project folder under DS-5 Eclipse environment? Also, I would like to place   .project/.cproject files and   .settings folder,   if possible.

    …
    • Answered
    • over 6 years ago
    • Software Tools
    • Arm Development Studio forum
  • How to debug a target not list in DS-5 connection tab?

    TonyHo
    TonyHo

    I want to debug the Cortex-A15 MP from renesas (r8a7791) with the DStream, but the chip is not list in the debug configuration connection tab.

    I have tried to select the other A15 to connect the target, but it didn't work.

    So what can I do to make…

    • Answered
    • over 6 years ago
    • Software Tools
    • Arm Development Studio forum
  • Can PC debug CMx-based MCU without debugger ?

    stevens.wang
    stevens.wang

    On ARM official website, I saw some description about debug method by Freescale Vybrid.

    It sounds like below (No JTAG or SW connection):

      [PC Host]  <--- USB wire ---> [Freescale Vybrid]

    So it seems there is a bridge inside Vybrid, which…

    • Answered
    • over 6 years ago
    • Software Tools
    • Arm Development Studio forum
  • DSTREAM/DS-5 with BCM Advanced Research Board

    Michael Robbeloth
    Michael Robbeloth

    To Anyone out there,

    I was wondering if someone could help me to connect a DSTREAM to a BCM Advanced Research Board (Freescale i.MX6 ARM Motherboard, Cortex A9 Solo Core, HDMI, LVDS, RISC-based, MIPI-CSI Camera Interface, low power ARM M…) running…

    • Answered
    • over 6 years ago
    • Software Tools
    • Arm Development Studio forum
  • DSTREAM unable to connect to custom freescale vybrid platform

    Abdul Nihad
    Abdul Nihad

    My client has provided a DSTREAM and professional edition of DS5. I am new to DSTREAM. We are working on freescale vybrid.  When I tried to debug my application in DS-5 using vybrid tower and DSTREAM it is able to debug. But when I tried on our custom…

    • 5145.zip
    • over 6 years ago
    • Software Tools
    • Arm Development Studio forum
  • Why can't DS-5 see android device in debug configurations?

    Anton
    Anton

    (ubuntu 12.04,android 4.1, ds the newest) ADB works and Java debug works. Erlyer native debug worked on ubuntu 13.10, but in some wonderfull moment itstoped adn i didn't catcha thing that it caused. I desided to reinstall OS and all my soft. Why does…

    • over 6 years ago
    • Software Tools
    • Arm Development Studio forum
  • A Potential Look Inside the 5G Baseband Processor

    Eoin McCann
    Eoin McCann

    Take one look at the outside world in 2016 and you will see that everything is becoming connected; our inanimate objects are growing smarter while our electronic devices are gaining ever more computing power and connectivity. Mark Zuckerberg said at a…

    • over 4 years ago
    • Processors
    • Processors blog
  • Video interview with silicon debug expert Mark LaVine

    Eoin McCann
    Eoin McCann

    On the list of activities that system designers enjoy doing, “debugging” is invariably near the bottom. That’s because it is often complicated, time-consuming and downright frustrating to track down and identify what is going wrong on the chip. However…

    • over 5 years ago
    • Processors
    • Processors blog
  • Silicon autopsy: Understanding when chips fail

    Eoin McCann
    Eoin McCann

    In a lot of ways debug is similar to being a medical doctor. A patient comes in with some complaints and lists their symptoms, but you need to run tests in order to properly diagnose the issue before focusing the mind on how to fix it. A lot has been…

    • over 5 years ago
    • Processors
    • Processors blog
  • 了却芯片设计的恐慌

    Song Bin 宋斌
    Song Bin 宋斌

    英文版 English Version:Taking the fear out of silicon debug

    现代 SoC 可谓工程上的伟绩,不断地从有限的功率与面积中榨取更多性能。 然而,复杂性是可靠性的死敌。

    “调试一段代码要比当初写这段代码难上两倍。 所以,你把代码写得无比聪明,你也必定不会聪明到能够对其进行调试。”

    — Brian W.Kernighan 和 P. J. Plauger《The Elements of Programming Style》

    …
    • over 5 years ago
    • 中文社区
    • 中文社区博客
  • 通过智能配置进行系统汇编

    Song Bin 宋斌
    Song Bin 宋斌

    英文版:System Assembly through Intelligent Configuration

    作者:eoin_mccann


    现代 SoC 采用大量 IP 模块来设计,这些模块已经获得商业许可或沿用前代设计,同时加入一些新的专有组件。集成所有组件常常很耗时且易于出错,因为设计者需要手动或者通过僵化且过时的脚本将 SoC 拼接到一起。高度可配置的 IP 模块形式(如互联光纤和调试与跟踪子系统)也存在诸多挑战。

    为了解决这些问题,ARM® 今天发布了三款新工具,作为 IP 工具套件的…

    • over 5 years ago
    • 中文社区
    • 中文社区博客
  • System Assembly through Intelligent Configuration

    Eoin McCann
    Eoin McCann

    Chinese Version 中文版:通过智能配置进行系统汇编

    The modern SoC is designed with many modular IP blocks that have been commercially licensed or reused from previous designs, along with some new proprietary components. Integrating all of the components has typically proven…

    • over 5 years ago
    • Processors
    • Processors blog
  • Taking the fear out of silicon debug

    William Orme
    William Orme

    Chinese Version 中文版:了却芯片设计的恐慌

    The modern SoC is a feat of engineering that continually squeezes greater performance from defined power and area constraints. However the arch nemesis of reliability is complexity.

    “Debugging is twice as hard as writingthe…

    • over 5 years ago
    • Processors
    • Processors blog
  • Debug over power-down

    Paul Black
    Paul Black

    Efficiency is at the heart of the ARM® architecture. ARM cores are commonly used in products where power consumption and battery life are critical considerations, but this can pose additional challenges for a debugger. For DS-5 v5.21, DSTREAM support…

    • over 5 years ago
    • Software Tools
    • Tools, Software and IDEs blog
  • 简化 ARM 平台上的开发:针对多核 SoC 构建自定义调试与跟踪解决方案

    Song Bin 宋斌
    Song Bin 宋斌

    原帖地址:Easing development on ARM: Building customized debug and trace solutions for multi-core SoCs

    原作者:mayanksharma

    剑桥大学近期的一项研究表明,全球每年软件调试的总花费已经达到 3120 亿美元之巨,开发人员平均将一半的编程时间用于查找和修复错误(完整报道请见此处)。将这一巨大数字除以地球上 71 亿总人口,可以算出每人平均花费 44 美元。也就是说,这足够让全世界每个人都买一台 Raspberry…

    • over 6 years ago
    • 中文社区
    • 中文社区博客
  • Gamelab 2014: Performance Optimisation and Debug Tools for mobile games with PlayCanvas

    Jonathan Kirkham
    Jonathan Kirkham

    Back in June I had the pleasure of visiting Barcelona in Spain for the first time to give a presentation at Gamelab.

    I was lucky enough to attend some of the other talks given and was impressed by the quality and diversity of the presentations.

    Particularly…

    • Performance Optimiszation and Debug Tools for mobile games with Pl.pdf
    • over 6 years ago
    • Graphics and Gaming
    • Graphics and Gaming blog
>