• FLM and Keil version

    egc
    egc

    Hi all,

    One question regarding including a custom FLM file in the Flash Download dialog.

    Does the Keil version used to compile the FLM in the first place has any implication on whether or not the FLM can be used in other Keil versions?

    I compiled an initial…

    • 10 months ago
    • Software Tools
    • Keil forum
  • why does the loop in Keil run one more time?

    ChangeTheWorld
    ChangeTheWorld

    Hi 

    I use designStart cortex-m3 with ram and rom which inplemented by the internal ram in FPGA board.

    And then I successfully connect it with Keil through JTAG.

    And I try to run the simple function below:

    uint8_t i = 0;
    uint8_t k = 50;
    
    for(i = 0;i…

    • 10 months ago
    • DesignStart
    • DesignStart forum
  • Keil error A1145E

    lm3915
    lm3915

    Hello. I am trying to start a project with STM32F358VCT6. I selected the MCU in CubeMX and only added one pin as GPIO to start with. When I open the project with Keil and try to compile it, I get this error:

    startup_stm32f358xx.s(227): error: A1145E:…

    • 10 months ago
    • Software Tools
    • Keil forum
  • Configuring Keil MDK for Beetle

    Annie Cracknell: Back on the 8th! :)
    Annie Cracknell: Back on the 8th! :)

    Keil Pack support for Beetle

    Support for MDK development on Beetle is provided by a Keil Pack file that provides debug and Flash support. Note that this is a non-maintained Beta quality release.

    `Arm.Beetle_DFP.2.0.0.pack' is available through Arm…

    • over 3 years ago
    • Open Source Software and Platforms
    • Wiki
  • Useful Links for Beetle platform

    Annie Cracknell: Back on the 8th! :)
    Annie Cracknell: Back on the 8th! :)

    Below are some useful links related to the Beetle IoT evaluation board

    • Versatile Express Beetle IoT Evaluation Board V2M-Beetle Technical Reference Manual
    • Arm Silver portal board support download, containing:
      • Keil MDK support Pack
      • CMSIS-DAP firmware…
    • over 3 years ago
    • Open Source Software and Platforms
    • Wiki
  • My MCU jumps to os_idle_demon after some seconds Network STM32f

    Parisa Mohamadi
    Parisa Mohamadi

    Hello,

    Here is my program:

    int32_t socket;
    uint8_t *sendbuf;
     
     
    void Time3(void){
    TIM_TimeBaseInitTypeDef TimeStruct; 
    NVIC_InitTypeDef nvicStructure;
    	
    NVIC_PriorityGroupConfig(NVIC_PriorityGroup_3);
    nvicStructure.NVIC_IRQChannel = TIM3_IRQn;…

    • 10 months ago
    • Software Tools
    • Keil forum
  • Is it possible to run Keil MDK inside a Windows Docker Container?

    Syam Pearson
    Syam Pearson

    We have successfully installed keil-MDK 5.29 inside the docker container with base image Windows server 2019. We used the command line installation options given in the link www.keil.com/.../uv4_ov_install.htm
    and used the command line options given for…

    • 10 months ago
    • Software Tools
    • Keil forum
  • Keil USB Middleware not working with CubeMX

    Alexander Wagner
    Alexander Wagner

    Hello I try to use Keil RTOS2 with CubeMX.

    I got USB Host running with this combination. But I can't get Keil USB Device (CDC or HID) Middleware  running with CubeMX.

    If I only use CubeMX+STM Middleware or only Keil RTE it's working. Everything is…

    • 10 months ago
    • Software Tools
    • Keil forum
  • Network Problem after updating keil packs

    Parisa Mohamadi
    Parisa Mohamadi

    Hello,

    In MDK-middle-ware 6 version we had DP88484 Phy in CMSIS Driver->Ethernet(PHY)->DP88484. After updating to the last version, I only have CMSIS Driver->Ethernet(PHY)->Custom. I set the updates all my files and set the settings. But I get this error…

    • Answered
    • 10 months ago
    • Developer Community
    • Infrastructure Solutions
  • stm32f411 stlink problem

    bagherian_99
    bagherian_99

    hey , first i'm sorry for my question
    I get stm32f411 and start programming and I set stlink but when I want to download , i have below error.

    and also

    • Answered
    • 10 months ago
    • Software Tools
    • Keil forum
  • Code completion/suggestion not working with STM32 project

    vibram
    vibram

    Hi

    I create a basic project like led blinking on F411RE nucleo board with ST32Cube MX qnd opened the project with Keil.
    When I open keil, I have no code completion/suggestion even for very simple function like HAL_Delay

    When i use and build the code with…

    • 10 months ago
    • Software Tools
    • Keil forum
  • why debugger aborted?

    Saad Anees
    Saad Anees

    when i try to debug in simulator mode in the  keil this error is occurred.

    Error: Could not load file 'C:\Keil_v5\ARM\Project\Objects\add.axf'. Debugger aborted !

    what should i do?

    please help me.......

    • 10 months ago
    • Software Tools
    • Keil forum
  • Keil v5 having a dark background and cant fix it

    albert93
    albert93

    Hello, since i installed Keil uVision5 i have a dark background color for my UI and i cant get it to normal.

    Ididnt installed a dark theme or anything else.

    I checked the windows settings and the color settings but it wont get to the default how it actually…

    • 10 months ago
    • Software Tools
    • Keil forum
  • Debugger watch window doesn't show correct values

    Alrie
    Alrie

    Hey there,

    I'm using keil v5.27.1.0 with a stm32h745 nucleo board. i'm developing firmware code for a student project.

    i'm having a problem where the watch window shows jibberish values for variables. it's literally as simple as a line of code…

    • 10 months ago
    • Software Tools
    • Keil forum
  • Remove multiple occurrences of a word in ARM (Big Endian)

    AcerS
    AcerS

    Hello, I am student working on a school assignment using the Keil IDE and fresh to learning assembly. I am tasked with removing multiple occurrences of a certain word in a character array (more details in the pdf attachment). I have am using the flowchart…

    • Answered
    • 11 months ago
    • Open Source Software and Platforms
    • Arm Development Platforms forum
  • Network Component recv() locked when Net4_CM3_L.lib(net_eth.o) compiled to off-chip RAM

    Matěj Jirka
    Matěj Jirka

    Hi guys,

    I am facing this problem for a long time and different versions of Keil.

    When net_eth.o is in off-chip RW_RAM1 (beginning at 0x60000000) networking does not work properly. (STM32F4xx, Network Component 7.12) Simplified Problem:

    Thread 1:

    netInitialize…

    • 11 months ago
    • Software Tools
    • Keil forum
  • Setting clock stm32f407 discovery

    Mkarpliuk
    Mkarpliuk

    Hello. I’m using stm32f407VG discovery and Keil uvision 5 and I can’t find an indtruction how to set clock properly. I wanna use internal 16 MHz SYSCLK for communication throughout virtual COM port. Here is a code I have found in a book, but it doesn…

    • 11 months ago
    • Software Tools
    • Keil forum
  • I can't find "#if !defined USE_STDPERIPH_DRIVER" in stm32f4xx.h

    bagherian_99
    bagherian_99

    hi dear reader

    I'm a beginner and i learned cmsis but now I want to use from standard peripheral libraries but I can't find "if !defined  USE_STDPERIPH_DRIVER" to define it in my project. my keil ver is 5.29.

    I google this problem but…

    • Answered
    • 11 months ago
    • Software Tools
    • Keil forum
  • Help with ARM project in Keil

    AcerS
    AcerS

       I am tasked for with checking for valid UPC codes for a school assignment using ARM. I have no prior experience with assembly. After I am able to load the registers with the UPC code I am having trouble figuring out how I am to skip over the required digits…

    • 11 months ago
    • Software Tools
    • Keil forum
  • microsemi smartfusion keil and softconsole

    naren_v
    naren_v

    The hex file ouput of keil and Softconsole are different.

    After loading the keil hex file into flashpro and programming it to a2f-eval-kit, there is no output displayed on UART.

    But the functionality is proper with softconsole hex file.

    From what i have…

    • over 1 year ago
    • Software Tools
    • Keil forum
  • Initialize C ++ object array in constructor?

    blahBlah
    blahBlah

    I am facing issues with initialization of an object array within the Constructor. I would like to initialize my array using initialization from brace-enclosed lists. But the armcc compiler for some reason, doesn't compile my code nor throw me a warning…

    • over 1 year ago
    • Software Tools
    • Arm Compilers forum
  • How to make a 1 us interrupt timer in stm32f103?

    MohsenJanlou
    MohsenJanlou

    Hello, i want to make a 1 us interrupt timer in for my stm32f103 in timer 2, i could make 10 us n 5 us, but in lower than that its not working truely! what should i do?!

    /* TIM2 init function */
    static void MX_TIM2_Init(void)
    {
    
      TIM_ClockConfigTypeDef…

    • over 1 year ago
    • Software Tools
    • Keil forum
  • Getting errors after including arm_math.h

    raja sharma
    raja sharma

    Hello i want to use dsp in my project in Keil IDE for that i have to include arm_math.h.

    In that case i am getting 30 errors

     

    C:\Keil_v5\ARM\PACK\ARM\CMSIS\5.6.0\CMSIS\DSP\Include\arm_math.h(1183): error: #79: expected a type specifier

      __STATIC_FORCEINLINE…

    • over 1 year ago
    • Software Tools
    • Arm Development Studio forum
  • Installing packs in Eclipse fails

    the_jim
    the_jim

    I just put in a fresh install of Eclipse to begin development of a STM32 based project on a new Windows 10 machine.

    I've gone through the Eclipse Marketplace and installed "GNU MCU Eclipse 4.7.1".  When going to the C/C++ Packs view, I click…

    • over 1 year ago
    • Software Tools
    • Keil forum
  • Markers in Binary file

    pdev
    pdev

    Hello alltogether,

    for me a binary-file (.hex or .bin) looks like there is no structure in it. 

    Do you know if it could be possible, to mark all my binarys, so that i can recognize? E. g. with a unique string i could grep or ? Or let's say line xyz start…

    • over 1 year ago
    • Software Tools
    • Keil forum
<>