Hello all,

After getting frustrated with the Xilinx design start guide I created a minimal SoC implementation of CM3 using fusesoc. It currently runs on Arty but could be made to run on other FPGAs that have a fusesoc supported backend.

Both the Xilinx…

Just starting... Is it reasonable to work through M3 DesignStart as an intro to M7 Design Kit?  (I do not yet have access to M7 Design Kit, but want to get a head start on my ARM project) I'm hoping that the ARM RTL, TB and other aspects of the supplies…

Wenkwei asked: "with the M3 designstart CMSDK, is it possible to design multi-master bus? In the IoT Cortex-M TRM, only an ahb-lite structure is illustrated. That document does mention AHB and APB expansion through INTEXP[1:0] but what if there are more…

Hi,

I am using Quartus Prime Lite 17.0.2 for building Cortex-M3 DesignStart RTL.

I can successfully build the RTL, but I got some critical warnings as follows. Can I ignore these warnings? Is there any effects on the design by these warnings?

Critical…

All,

I received the Versatile Express Cortex-M Prototyping System + and am using DesignStart. I powered on the board and the operating system booted up without any problems.

In the V2M_MPS2/MB/HBI0263C/board.txt file, the following are the sequence of…

Hello,

For my bachelor thesis I have to implement the RTL-Code of the Cortex-M3 in the DE-10 Standard Board.
The FPGA on the Terasic DE-10 Standard is the Cyclone V  5CSXFC6D6F31C6.

If I try to compile the ".sof" file of the Eval package in Quartus Prime…

Hello,

I try to implement the Cortex-M3 processor on an FPGA via Quartus Prime. I set up the SSE050 Subsystem and tried to connect several peripherals to the board. I want to test the functionality with a uVision project lighting some LEDs. To have access…

I download arm cortex m3 prototype  to the CYCLON 5 FPGA .Then use keil to debug the software but when click he debug button ,I encountered an error like the one shown above.

I don't know how to solve the problem 

Hi,guys.

We have already  applied for Cortex-M3 DesignStart Pro and purchased the V2M-MPS2+ motherboards.

To my knowledge, V2M-MPS2+ motherboards was designed for DesighStart Eval and can be integrated with arm Embed OS easily.

So, my question is:

1, can…

hi, GUys

   i buy a mps+2 board  and try to implement  mbed_blinky examples. but i meet issues on debugger and download axf files.

     now i can:

        1. export mbed_blinky examples for keil 

        2. compile success and generate axf file

        3. download fail

I use the ARM Cortex-M3 DesignStart Eval on the FPGA platform, I use J-link to download the program to the system but the system is not properly implemented. I downloaded the generated Hex file via J-link to the FPGA development board via Keil. Is the…

Hello Everyone,

i want to use Designstart evl

&

i am not able to install these two software (GNU Binutils version 2.22. and GNU Make version 3.80.)  which is very important  for designstart evl .

So, Can you Please tell me how can i install or from where…

Such as the title, I have a board of MPS3

I want to try to use the microphone to input the sound, then output through the speaker.

But I have been unable to find a way. I hope someone can point me out. Thank you.

I want to run Cortex M-3 soft processor core on ZedBooard. I have downloaded the cortex M-3 IP core, created a deisgn by integrating Zynq Processor with Cortex M-3 processor and generated bitstreams.

I have also included the provided SW repository from…

Hi. First of all, thanks for your attention in advance. I have to say that I am completely new in FPGA programming, but I could have never imagined that running an example with a documentation explaining it step by step could be so cumbersome and error…