I try to use RL-FlashFS. Exactly SD_File Example on MCB2300.
RL-ARM Version 3.21. MDK-ARM Version 3.20.
I modified cmd_fill function:
/*---------------------------------------------------------------------------- * Create a file and fill it…
I try to use RL-FlashFS. Exactly SD_File Example on MCB2300.
RL-ARM Version 3.21. MDK-ARM Version 3.20.
I modified cmd_fill function:
/*---------------------------------------------------------------------------- * Create a file and fill it…
Hi,
I am using RVDS 3.0 to build a ARM9 targetted C- verif environment. I am using the following command and I am getting the following Error while linking the same.
tcc -g --dwarf2 -Iinc,/SCRATCH/arm_h_files,/SCRATCH/arm_h_files,/common -c -D__ARM__…
typedef struct
{
int query_zone:4;
}statusrequest_t;
statusrequest_t state;
state.query_zone=8;
if ( state.query_zone==8)
printf("The result matches n=%i n\r",state.query_zone);
else
printf("This should not occur n=%i\n\r",state.query_zone);
…
Hello to everyone,
I want to my ARM7 to access a (const)bitfield array, but as i'am
absolute beginner not sure about C-syntax. My textbook don't includes
Bitfield-Array.
Hope someone takes a look at this:
struct
{
unsigned char red[32] …Hi, I encounter the following issue during compilation of my real-time test example
uv3Test.axf: Error: L6218E: Undefined symbol os_active_TCB (referred from rt_task.o). uv3Test.axf: Error: L6218E: Undefined symbol os_alloc_TCB (referred from rt_task…
Dear all, I am using LPC 2132 controller. In nested interrupt
IENABLE and IDISABLE macros giving error in RVCT.
The error is as below
source\cpu.c(61): error: #20: identifier "LR" is undefined source\cpu.c(61): error: #20: identifier "SP" is undefined…
When I compile/link the 'hello' example with remapping the serial
I/O to the UART1, all is doing well.
When I do exactly the same in my program, I get the following output
from the linker:
linking...
*** WARNING L7: MODULE NAME NOT UNIQUE MODULE…
Hi,
I have a library "library.a" and I am trying to use it with GNU compiler. As a base I take 'measure' project from examles which is compiling ok without library, but when I am trying to compile project with "library.a" I get a lot of errors like this…
Hello to everyone,
getting started with Realview seems to be a little
complicated.
The Blinky exampe works. But after adding a printf everything
went wrong.
Now i followed the advices and files in my project are:
ADuC702x.S (this is the Startup)
Serial…
Hello,
I'm trying to port uC/OS II (i bought the book) to MCB2140 and i'm using Keil CARM compiler. I took port from ucos-ii web site, which was written for IAR. I modified some stuff in asm file (difference betwen iar compiler and keil) but when I…
hi.
I copy some codes from ADS and then plaster
them to keil as test.s file.when I compile them.some errors:
assembling test.s...
word.s(1): error A65: IDENTIFIER EXPECTED
word.s(5): error A116: NO CURRENT 'AREA'
word.s(7): error A116: NO CURRENT…
Hello,
I don't know how to process with this error when linking a new Projeckt.
Could anyone has a suggestion?
Best regards
-Emeric
*** WARNING L23: UNRESOLVED EXTERNAL SYMBOLS
*** ERROR L128: REFERENCE MADE TO UNRESOLVED EXTERNAL
SYMBOL: xSerialPortInitMinimal…
Want to use own hardware abstraction layer files. Need to point to different path for hardware includes. For this I need to remove the Keil default include to their headers. Any ideas?
uVision3 is crashing whenever I try to download to flash. My appliation compiles OK but whenever I try to flash the device the windows message "uVision3 IDE has encountered a problem and needs to close. We are sorry for the inconvenience." appears. My…
I would like to know if the Keil ARM tools (uVision IDE) used with the CARM C compiler is restricted in any way to just compile source code > than 16K? Or its restriction only applies when used as a Debugger?
Thanks;
Daniel
Greetings,
I keep getting requests from my long-distance collaborators to "just ZIP up your current project and send it to us". This means I need to locate the files in the project from the chaff of abandoned attempts that I have kept for reference…
Using Keil MCBSTM32 (STM32F103RB processor) and uVision3 V3.55a
The goal is to "encapsulate" data in C. To do this I want to create access methods (get/put) that are accessible externally, but the data, being declared static, is not.
I…
I am using the MCBSTM32 evaluation board. I started with the "blinky" project.
I wanted to change it so that I could DMA a block of data from the ADC to memory. OK, I did that and it worked fine.
Next, I wanted to get an interrupt when…
Greetings,
I may have an old version of the distribution files and if that is the case, please ignore this.
If your use the STM32_Init.c file, this may be of interest to you.
For the Keil MCBSTM32 examples, all the STM32_Init.c files that I have…
Hi,
Processor: STM32F103RB (Kiel evaluation board MCBSTM32)
I am attempting to setup a timer triggered ADC operation. To trigger the ADC I was planning to use TIM1_CH1.
I am having problems understanding the timer section. There are just so many…
I put a simple class in a file named "test.h". The class is as follows:
class a {
public: int b;
};
I am using the Keil MCBSTM32 board (STM32F103RB processor).
I place this file in "C:\Keil\ARM\Boards\Keil\MCBSTM32\Timer". I then open…
Greetings,
I have seen the user guide for the Configuration Wizard and to say the least it is terse. It lacks real explanation of what it is doing. By observation and analysis, I think I have some idea how it works. A more explanatory tutorial or example…
I want to use OpenCv library on ARM Lpc1768, but when i want to use opencv library in Keil(V.4), I face a lot of error. I searched through internet and then I realize I can't simply use OpenCv in Keil, because although keil can read c++ files, but it…
I am using stm32f4 Discovery tool keil.
I have library file in .a format for Ex : algorithm_cal.a like
this
I am adding this file to file group and made option to target on
right click on that file & make it has Library file.
when building it getting…
ERROR : L6449E
While processing <filename>: <message>
why this error came & how to resolve this