I have seen this link " DS-5 Development Studio | SoC Bring-Up Using the Platform Configuration Editor PCE – ARM Developer " for new SoC Bring up in DS-5 was using DSTREAM.
Can I use RealView ICE instead of DSTREAM for new SoC bring…
I have a query that whether the Dstream tool will support AT32UC3C1512C controller debugging.
I am working with an S32V234 (NXP) branded ARMv8 Cortex-A53. I am trying to bring the board up in a secure way.I'm using DS-5 Development Studio Ultimate edition.I created a sample C Project. For flashing my code on that ARM Core.Firstly I Configured…
Hi !
I'm considering investing in DSTREAM to add a solid jtag debugger to our workplace, and we are using a cross compiled GCC (usually from Ubuntu or Linaro) to build our bare metal apps.
- Do I have to also by DS-5 to be able to use the DSTREAM…
I am trying to debug my code using DSTREAM. DS-5 version is 5.24.1. I am getting error related to DSTREAM firmware and asking me to update it's firmware.
For that, I am not getting sufficient information on web.
for example, on below link,
Hi,
I have TMDXRM48HDK board and DStream Unit and valid DS-5 license which includes license for Streamline performance Analyzer.
When I connect to StreamLine Performance Analyzer, it will connect to the board. When I try to capture the data, it gives following…
Hello, all.
I'm trying to attach Dstream JTAG debugger to a Cortex-M3 core on HiKey Board with DS-5 v5.23.0 Ultimate Edition on Windows.
I tried the following procedure but it took more than one minute to connect to the target.
That is too slow to be…
paulc@ubuntu14:/usr/local/DS-5_v5.22.0/bin$ cdbimporter -c /usr/local/DS-5_v5.22.0/sw/debugger/configdb -t /home/paulc/hikey_configdb /home/paulc/hikey_configdb/Linaro_HiKey.rvc
DS-5 Config Database Import Utility v1.2
Copyright 2011-2014 ARM Ltd
Reading…
Hi everyone,
I download DSTREAM V5.22 and install it on my desktop(windows10 x64). The installation goes well, I didn't get any error. but when I open "Eclipse DS5-V5.22", I found eclipse don't contain any DS-5 function, I look like a non-DS-5 eclipse…
Is it possible to use CodeBench (Mentor Embedded), which is based on GNU compiler/debugger, with ARM's dstream JTAG units? CodeBench includes a debug sprite that communicates with the target which defaults to the GDB protocol for debug.
We are going to start a new project with a Freescale iMX6, the RTOS is a linux and we would like to know if is possible to compile the applications with the arm compiler or is only possible to make them with the gnu compiler.
We have the DSTREAM to debug…
attempting to use RealVeiw ICE v4.1 with DStream. Processor is Freescale i.mx25 with ARM926EJ-S. I get error message "Error V2801C (Vehicle): 0x05060012: Target in wrong state/mode." Any idea on what to look for?
Hi,
I am trying to create configdb entry for debug to conect to coresight using D-STREAM. I put ARMCS-DP in scan chain and try to configure .
Debug hardware config tool complains Coresight ROM table has failed - failed to read confi item DAP_CONFIG_INFO…
I am seeing a failure to connect to the DSTREAM debugger from DS-5 version 5.20
Just upgraded the debugger firmware to 4.20 which came with this DS-5 version. When I double-click to connect I get this error. Can't find any history on this problem. Anyone…
I have the DS-5 with Dstream, and I want to do a boundary scan to find the stage of every pin, how do I do that? and where can I find the manual for this?
Dear Ronan,
We recently got a Juno board. We sucessfully done the setup for android on that.(using the steps given in Setting up Android on Juno)
We are working on some multimedia application, which we want to port it to juno and see the performnace…
Hi,
I know that DSTREAM may work best with DS-5 studio. But out of curiosity, will this debug/trace unit work with some other (maybe free?) combinations of tools like GDB + OpenOCD? On its documentation it says DSTREAM "supports" 3rd party debuggers, but…
Run->Debug Configurations->Linux Application Debug->Connect to already running gdbserver
(1) how to run gdbserver in this case
I use a separate USB to connect to phone usb port, together with a JTAG connection to DSTREAM box…
Hello,
I have a custom ARM Cortex-A9 board. My aim is to load the kernel image onto the target via ARM DSTREAM. I have u-boot loaded into SNOR memory. The u-boot is running fine. After I get the u-boot prompt…
IDE: ARM DS-5 (v5.17.0)
Platform: Cortex-A8 (BeagleBoard…
I am working on PB1176JZF-S board. I am usins DS-5 editor and Dstream. I am able to write the program and bebug it. But i want to download my code into NOR or some static memory on the board. Please kindly tell me the procedure. I wrote a program to blink…
hello all
when i use DS-5 tool coupled to a Dstream to debug IMX6Q bare-metal, I get errors when I try to connect to te target: "Unable to connect to usb, Unable to connect to device CSMEMAP"or "Unable to connect…