GPIO interrupt won't trigger

I have set a pin on a Cortex M3 to act as an rising-edge triggered interrupt and it's not firing for some reason. What it should do is receive a 1Hz pulse, trigger an interrupt and start a 12.8Khz square...
GPIO Interrupts trigger problem

I am using LPC1788 controller (FBD208pin package). I use some GPIO lines of Port 0 and 2 as external interrupts. There are Opto couplers, proxy sensors, etc sensors (that generate single pulse) are...
GPIO Interrupts trigger problem

I am using LPC1788 controller (FBD208pin package). I use some GPIO lines of Port 0 and 2 as external interrupts. There are Opto couplers, proxy sensors, etc sensors (that generate single pulse) are...
GPIO interrupt won't trigger

I have set a pin on a Cortex M3 to act as an rising-edge triggered interrupt and it's not firing for some reason. What it should do is receive a 1Hz pulse, trigger an interrupt and start a 12.8Khz square...
LPC1768 GPIO Interrupt trigger when enabled.

Hi, I have a requirement where I need to turn on/off GPIO interrupts during certain events in my application. Requirement is to monitor both Falling/Rising edges when this interrupt is enabled. ...