problem LPC2148 VIC IRQ request

For example, the following two lines assign slot 0 to SPI0 IRQ interrupt request(s) and slot 1 to TIMER0 IRQ interrupt request(s): VICVectCntl0 = 0x20 | 10; VICVectCntl1 = 0x20 | 4; HOW TO GET...
problem LPC2148 VIC IRQ request

Hi the code given below needs to run the ISR when a cpature event occurs. But on simulating the code and running it on debugger it doesnot switch to irq mode and hence does not go to ISR for that...
problem LPC2148 VIC IRQ request

TIMER0 Match 0 - 3 (MR0, MR1, MR2, MR3) 4 0x0000 0010 Capture 0 - 3 (CR0, CR1, CR2, CR3) sir i am also confused. i just want to ask that when we use above code then according to manual slot 1 assign...
problem LPC2148 VIC IRQ request

TIMER0 Match 0 - 3 (MR0, MR1, MR2, MR3) 4 0x0000 0010 Capture 0 - 3 (CR0, CR1, CR2, CR3) sir i am also confused. i just want to ask that when we use above code then according to manual slot 1 assign...
problem LPC2148 VIC IRQ request

Hi the code given below needs to run the ISR when a cpature event occurs. But on simulating the code and running it on debugger it doesnot switch to irq mode and hence does not go to ISR for that...