• E305: Value out of range - <readlist> 'TCB'
    When using the Keil debugger, I get the following error in the command window: E305: Value out of range - <readlist> 'TCB': current=63161283, max. allowed=1...1024 The warning also appears in...
  • E305: Value out of range - <readlist> 'TCB'
    When using the Keil debugger, I get the following error in the command window: E305: Value out of range - <readlist> 'TCB': current=63161283, max. allowed=1...1024 The warning also appears in...
  • [DSTREAM]Target Message: Could not determine target state
    Hi all, I have a QCA IPQ4019 board. I am following this blog https://community.arm.com/tools/b/blog/posts/porting-linux-made-easy-with-ds-5 to debug from the stage in which u-boot loads the Kernel...
  • [DSTREAM]Target Message: Could not determine target state
    Hi all, I have a QCA IPQ4019 board. I am following this blog https://community.arm.com/tools/b/blog/posts/porting-linux-made-easy-with-ds-5 to debug from the stage in which u-boot loads the Kernel...
  • what is "transfer" signal mentioned in the APB state diagram? Can I use "PSELx" signal to determine transfer is going to happen?
    in the state diagram of APB, the master moves from one state to other state depending on the "transfer" is asserted or not, from which signal can I know the transfer is going to happen, is it from "PSELx...