OT: Atmel C51RB2 Osc

I have hand built a protoboard using the Atmel 89C51RB2. I used a 32 Mhz crystal and 33pf caps. When I scope the crystal pins I get a 95 nSec signal. This is about 10 Mhz. Is there some...
OT: Atmel C51RB2 Osc

I have hand built a protoboard using the Atmel 89C51RB2. I used a 32 Mhz crystal and 33pf caps. When I scope the crystal pins I get a 95 nSec signal. This is about 10 Mhz. Is there some...
Cortex M0+ WDT Osc Values

I am using a NXP LPC11U68 (Cortex M0+). Specific to the WDT oscillator, why does the KEIL start-up library define different oscillator frequencies than NXP data-sheet. Keil's 'startup_LPC11U6x...
Cortex M0+ WDT Osc Values

I am using a NXP LPC11U68 (Cortex M0+). Specific to the WDT oscillator, why does the KEIL start-up library define different oscillator frequencies than NXP data-sheet. Keil's 'startup_LPC11U6x...
Error in Keil uVision when changing osc

Hello, i have a little problem when i configure the external crystal of my ADuC7026. I do the following secuence: ----------------------------------------- volatile unsigned int dummy1, dummy2 dummy1...